| Customization: | Available |
|---|---|
| After-sales Service: | on Site Training |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tianwei KL series of Bored Pile Drilling Rig are new generation of multi-functional piling machinery, which are mainly big model that can drill hole specified with diameter of 1000mm. The products are widely applied in both civil and industrial construction work of foundation piling for urban constructions, railway, deep excavated retaining projects etc. There are two types due to different movement methods, crawler type KLU and walking type KLB, thus could be adopted in different geological conditions, and different foundation construction methods.
Multi-function drilling rig can be equipped with:
1.power head, the bored pile drills can finish cast-in-place concrete CFG pile and grouting piles driving by anger rig.
2. Vibrating hammer. Compression device can finish cast-in-place concrete piles, expanded piles with immersed tube.
3.hydraulic static pile or diesel pile. Can do precast piles and prestressed Piles.
4.Three-axises power head for underground continuous wall construction
5.Lifting tools for uplifting piles
Advantages
1.Crawling mechanism and walking mechanism can be ex-changed.
2.The column can be adjusted from two sides to ensure verticality of the drilling hole.
3.drilling and piling at the same time. Improves the efficiency of drilling holes and shortens the time of the project.
4. No noise, no vibration, no pollution and good quality of drilling holes.
5. Accuracy and convenience in position by up and down the column
6.Operation systems like electronic system, hydraulic system, monitor system are all gathered in the operation room for comfortable and convenient operation.
Structure design
1. The column is foldable. The complete appliance can attached with towing device to be transported from different construction sites.
2. The power head system uses three-ring reducer mechanism, with great weight bearing capacity, and reliable in use.
3. The side adjustment mechanism can work independently to adjust the verticality of the column.
4. Spiral vane of the drilling rod uses high quality carbon steel 16Mn, which is hard-wearing, good in strength. The bit inlays carbide blades to drill faster than normal.
5. The main windlass uses reducer with greater reduction ratio, which is simple in structure but good in the rope-arranging work.
the parameters are as below:
| ITEM | KLB20-600 | KLB26-800 | KLB32-800 |
| walking way | Electro-hydraulic step | electrical walking-type | electrical walking-type |
| max drilling depth | 20m | 26m | 32m |
| max drilling diameter | 600mm | 800mm | 800mm |
| max output torque | 36KN.m | 48.5KN.m | 65KN.m |
| rod rotated speed | 20r/min | 20r/min | 20r/min |
| allowed lifting force | 240KN | 400KN | 640KN |
| power for power head | 45KW*2 | 55KW*2 | 55KW*2 |
| reductor of power head | ZZSH430 | ZZSH450-45 | ZZSH480-60 |
| lifting way of leader | three points support | three points support | three points support |
| leader size | rectangle section | 530mm | 630mm |
| leader depth | 23m | 30.5m | 36.6m |
| leader oriented center distance | 600*102 | 600*102 | 600*102 |
| leader incline range | front inclination 5° back inclination 3° |
front inclination 5° back inclination 3° |
front inclination 5° back inclination 3° |
| rotary way | rotary motor | rotary motor | rotary motor |
| rotary angle | ≤360° | ≤360° | ≤360° |
| rotary speed | 0.25r/min | 0.25r/min | 0.25r/min |
| stroke | 1.05m | 1.5m | 1.8m |
| lenth of the walking track | 5.0m | 6.0m | 7.3m |
| climbing ability of pile frame | 4° | 4° | 4° |
| speed of incline adjust line | 0.55r/min | 0.55r/min | 0.55r/min |
| single pulling force | 4T | 8T | 8T |
| motor power | 18.5KW | 22KW | 22KW |
| increasing speed | 18.5m/min | 18.5m/min | 18.5m/min |
| single pulling force | 1.5T | 1.5T | 3T |
| motor power | 7.5KW | 7.5KW | 13KW |
| lifting speed | 25m/min | 25m/min | 25m/min |
| overall dimensionL*W | 9m*4.5m | 10m*5.2m | 11.5m*6m |
| total weight(T) | 52 | 63 | 78 |
1) Minimum order: 1 unit.
2) Valid period: 15days.
3) Package: Nude package.
4) Payment: 30% of total contract price by TT as deposit, balance amount of total contract price by TT upon inspection before delivery to China sea port for export.
5) Delivery: Approximated 20 days ready for inspection at China factory from the day of receiving the deposit in full amount.
To train operating,maintenance and construction people for our customers.
♣ We guarantee to keep our Main Machine in good repair for 1 year after sale and 6 months for accessories. In the guarantee time, any quality problem caused by manufacturing after confirmation of us shall be repaired for free; Exceed the guarantee time, we can also supply repair services to our products charged for repair cost only.
){kind=link}